How to use a circular saw if you’re a beginner

circular saw

Circular saws are one of the most important tools in a workshop. This is because they help in cutting different materials such as wood, plastic, tiles and metals. However, circular saws are a bit challenging to use for beginners as they require a high degree precision and dexterity. There are two types of circular saws on the market namely: corded and cordless circular saws, both of which you can learn about on Corded models get their power from the mains socket while cordless models are powered by a battery. With it, you do not have to worry about cutting the cord with the saw but on the down side, you have to contend with charging it when the battery goes down.

It is also important for beginners to know that circular saws are very powerful and therefore, if you use them in the wrong manner, you could get serious injuries. As a result, you need to take the right precautions such as wearing glasses, removing the battery when the tool is not in use and if yours come with a wire, keep it away from the blade. To use the tool correctly, you need to follow the steps below.

The first step in using a circular saw is by starting it. You need to find the start button which is mostly located where your index finger rests when holding the handle of the tool. To start the tool, unlock the switch before depressing it. Also, you have to note that the tool stops every time you release the switch.

The next tip on using a circular saw is to always use two hands when sawing. If you are right handed, place your right hand on the handle with the switches while your left hand will naturally rest on the steering handle. For those who are left handed, they can follow the reverse of the above. And as you begin to cut, pull back the cover to expose the blade.

Sawing with the circular saw is a bit tricky when compared to using the other types of saws. To maintain a straight line, you need to look through the eye on the front side of the saw. On the other hand, there are models that come with a laser light system that clearly defines the line of cut.

There is also a screw that regulates how deep you want to cut. Therefore, you need to determine the depth that you need your blade to go right before you begin sawing. You can also take this opportunity to set the blade position. This determines the position that the blade will cut through. The screw on the front sets the angle at which you want to make the cut.

If you are using a battery powered model, you need to learn how to remove and replace the battery. This is especially if you will be handling a heavy project that will drain battery power fast. Some models come with two sets of batteries so that, instead of waiting for the tool to recharge, you just switch the battery.